Comp Series | Rear Wing (MK7/MK7.5 GTI-R-GTD)

Looking for Rear Wing accessories or replacement parts separately? View our Rear Wing Accessories / Replacement Parts.

Please view the .pdf below for a in depth look at the performance and data of this product.

• [OVERVIEW OF PERFORMANCE / DATA] .pdf
• [INSTALLATION GUIDE]

Often Imitated, Never Duplicated.

Let us preface by boldly stating this is NOT a universal product, but rather handcrafted to fit the Volkswagen MK7/MK7.5 GTI - Golf R - GTD accurately and specifically. Isn’t that such a refreshing statement? Gone are the days of “universal” parts that yield lackluster results. This product DOES NOT fit the standard Golf TSI or TDI.

WHATS INCLUDED?

• Installation Guide
• 250mm 6061 T6 Wing Element (1370mm span)
  
• 6061 T6 Billet Aluminum Airfoil Mounts
• 6061 T6 Billet Aluminum Uprights
• 5052 Upper Hatch Mounting Bracket
• 5052 Lower Hatch Mounting Brackets
• AoA Adjustable End Plates
• Stainless Metric Torx Hardware
• Loctite Threadlock
• Pre-installed CNC precision knife cut Foam Pads on both Airfoil and Hatch Mounts
• Weighing in at 17.3lbs

GOOD TO KNOWS!

• Fits Years 2015-2021 (GTI, Golf-R, Rabbit, GTD)
• Wing Element comes with Billet Mounts pre installed
• Height measuring in at 1" above tallest point of roof line
  
• Trailing edge measuring 3.125" from rear bumper
• 4.8lbs lighter than our previous gen
• Reduce oversteer and increase stability at higher speeds
• Combat a stiffer suspension set up
• Reduce braking distance
• AoA adjustability 0-12deg in increments of 2deg
• CFD and FEA validated
• CNC precision machined mounts and brackets
• CNC precision press brake bent brackets
• Most innovative and least intrusive mounting system available
• Beautiful and Durable Powder Coat finish

We Are Innovators
aerofabb® is proud to say that we are the first to develop a fully functional Rear Wing Kit for the MK7/MK7.5 GTI-R-GTD with such a unique design and mounting system.

Rear Wing Kit Construction
The aerofabb® Competition Series Rear Wing Kit is constructed from precision CNC machined 6061 T6 Billet Aluminum Uprights and Airfoil Mounts which are finished in a smooth and durable matte black powder coat. Both the Airfoil and lower Hatch Mounts feature pre-attached precision CNC knife cut foam mounting pads to reduce vibration, eliminate any metal on paint contact, and create a weather proof seal. 

The Upper Hatch Mounting bracket fits in place of the OEM third brake light without modification to the OEM Spoiler. This design choice while sleek and innovative, was also the LEAST intrusive and most secure mounting approach vs other offerings. We have developed a minimal plug-n-play third brake light replacement if you wish to run one. You can select this option at checkout or purchase separately HERE. (also works with previous gen Rear Wing Kit)

The Wing Element is a rigid, lightweight, 6061 T6 Aluminum airfoil with a span of 1370mm and a chord length of approximately 250mm, finished in a lightly textured, durable, matte black powder coat.

The endplates are constructed from a U.S made, High-Impact Plastic which comes in a durable, lightly textured, Matte Black Finish. 

Countersunk Stainless Steel Metric Torx hardware is used throughout the kit to securely mount and fasten all components together. Durable and weatherproof black plastic washers are utilized on the Wing Elements AoA adjustment points to eliminate marring of the powder coated finish.

Adjustability
Depending on your current aero, suspension set-up/rake, or track of choice, aerofabb® gives you AoA adjustability on both the Wing Element and Endplates from 0-12deg in increment of 2deg. 

FEA Optimized Mounting System
FEA (Finite Element Analysis) software was used to reduce weight and validate that the mounting components where still able to maintain the load, stress, and stability needed to function properly. A weight of 5.7lbs was shaved moving to this revised bracket system vs our previous gen. 

CFD / Real World Optimized Aerodynamics

Using ANSYS Fluent Software for CFD (Computational Fluid Dynamics) and real world testing on track, we were able to optimize our design and validate its functionality. Our FEA validated, 6061 T6 Billet Aluminum Swan Neck Uprights support the wing from above, leaving the low pressure zone smooth and free of any interference. 

• [OVERVIEW OF PERFORMANCE / DATA] .pdf

Shipping.

• Street Edition products ship for free to the lower 48 states ONLY ( Alabama, Arizona, Arkansas, California, Colorado, Connecticut, Delaware, Florida, Georgia, Idaho, Illinois, Indiana, Iowa, Kansas, Kentucky, Louisiana, Maine, Maryland, Massachusetts, Michigan, Minnesota, Mississippi, Missouri, Montana, Nebraska, Nevada, New Hampshire, New Jersey, New Mexico, New York, North Carolina, North Dakota, Ohio, Oklahoma, Oregon, Pennsylvania, Rhode Island, South Carolina, South Dakota, Tennessee, Texas, Utah, Vermont, Virginia, Washington, West Virginia, Wisconsin, Wyoming)
• Products that are not in stock may require a Lead Time (the time is takes to manufacture or get a product ready BEFORE shipping) listed in the product description. aerofabb products are in very high demand and we fulfill hundreds on a weekly basis. This lead time allows us to work down the list of orders from oldest to newest and is not always the time it takes to physically manufacture your product. We try our very best to beat these times when possible.
  
• (ALL SHIPMENTS) When you place an order, estimated shipping costs and delivery dates will be based on parcel service at the time of purchase. If a lead time is required, these times will need to be factored into the estimated delivery date. (Displayed Lead Time + Parcel Service Delivery Date = Total Estimated Delivery Date) 
• (INTERNATIONAL SHIPMENTS) aerofabb, LLC is not responsible for Customs Import Fees of any kind upon delivery of a product(s) to the end user.  
  
• Funds WILL NOT be refunded for any shipment that is rejected by the customer. (customs, change of address, etc.) 

Returns

• aerofabb, LLC will accept Returns for items damaged during shipment within 24 hours of delivery. A new replacement item will be sent as a solution. 
  

• If you need to return a damaged item, please Contact Us with your order number and details about the product you purchased. We will respond quickly with instructions on how to return the items from your order.

• Cancelled orders that have not been shipped yet are not eligible for a refund. 
• All sales are Final. 

Pricing

• Product pricing is displayed in USD (United States Dollar)
• PRICING AND AVAILABILITY ARE SUBJECT TO CHANGE WITHOUT NOTICE.