Comp Series | Front Splitter (Toyota MK5 Supra)

Looking for Front Splitter accessories or replacement parts separately? View our Front Splitter Accessories / Replacement Parts.

WHAT COMES STANDARD WITH A BASE KIT?

• Front Splitter Blade
• Chassis Mount Bracket System
• Air dam
• Stainless Steel / Aluminum Hardware

WHAT DOES NOT COME STANDARD WITH A BASE KIT

SAVE 10% on all add-ons if selected now during splitter build!

• End Plates
  

Our end plates with integrated dive planes help drive the aero balance forward. With a minimal drag penalty, vortices are generated and travel down the side of the car acting as a barrier by keeping high pressure air around the car from entering the low-pressure region under the car. 

• Skid Pucks

Our skid pucks feature a low drag NACA profile and help protect your front splitter blade from making contact with the asphalt which can result in unwanted wear.

GOOD TO KNOWS!

• Fits Years 2019+ MK5 Supra
• Increase front end downforce for better high speed stability and cornering
• Powder coated bracketry
• Air dam easily takes shape within a pre machined channel with locking teeth
• No need to remove Front Bumper for installation
• Feed your Rear Diffuser cleaner air
• Pockets milled on top side to remove unnecessary weight
• Pre installed press-nuts in all brackets
• Pre dimpled holes and necessary countersinks on bottom side of splitter for optional add-ons
• Easy blade removal with the use of press nuts
  
• Designed within the "aero rulesets" for the most commonly entered competitive classes
• Fully Optioned blade and all bracketry weighing in at roughly 16lbs

Minimally Intrusive Chassis Mounting System
Small windows are made by trimming the lower side of your front bumper allowing for the three forward mounting brackets to fit into place. The two remaining pedestals utilize a factory mounting location and hardware. 

Be fast and look good while doing it 
Just because its functional doesn't mean it cant look good :) When it comes to any product we put our name on, we take a lot of pride in our attention to detail, and this front splitter is absolutely no exception. Every aspect of the splitter blade has been accounted for during the design process. The material is beautifully machined with pockets, counterbores, countersinks, and chamfers where need be. Expect nothing but the best when it comes to fit and finish.

Front Splitter Kit Construction
The aerofabb® Competition Series Front Splitter blade is constructed from a 0.5", U.S. Made, lightweight , high-impact, UV resistant plastic. We have tested nearly every material under the sun and we believe this choice is superior over many other options like aluminum, aluminum composites, wood, and even carbon fiber for this specific application.

CFD Optimized Aerodynamics
Using ANSYS Fluent Software for CFD (Computational Fluid Dynamics) we were able to optimize our design and validate its functionality. Please view the .pdf below for a in depth look at the performance and data of this product.

Please view the .pdf below for a in depth look at the performance and data of this product.

• [OVERVIEW OF PERFORMANCE / DATA] .pdf

Shipping.

• Street Edition products ship for free to the lower 48 states ONLY ( Alabama, Arizona, Arkansas, California, Colorado, Connecticut, Delaware, Florida, Georgia, Idaho, Illinois, Indiana, Iowa, Kansas, Kentucky, Louisiana, Maine, Maryland, Massachusetts, Michigan, Minnesota, Mississippi, Missouri, Montana, Nebraska, Nevada, New Hampshire, New Jersey, New Mexico, New York, North Carolina, North Dakota, Ohio, Oklahoma, Oregon, Pennsylvania, Rhode Island, South Carolina, South Dakota, Tennessee, Texas, Utah, Vermont, Virginia, Washington, West Virginia, Wisconsin, Wyoming)
• Products that are not in stock may require a Lead Time (the time is takes to manufacture or get a product ready BEFORE shipping) listed in the product description. aerofabb products are in very high demand and we fulfill hundreds on a weekly basis. This lead time allows us to work down the list of orders from oldest to newest and is not always the time it takes to physically manufacture your product. We try our very best to beat these times when possible.
  
• (ALL SHIPMENTS) When you place an order, estimated shipping costs and delivery dates will be based on parcel service at the time of purchase. If a lead time is required, these times will need to be factored into the estimated delivery date. (Displayed Lead Time + Parcel Service Delivery Date = Total Estimated Delivery Date) 
• (INTERNATIONAL SHIPMENTS) aerofabb, LLC is not responsible for Customs Import Fees of any kind upon delivery of a product(s) to the end user.  
  
• Funds WILL NOT be refunded for any shipment that is rejected by the customer. (customs, change of address, etc.) 

Returns

• aerofabb, LLC will accept Returns for items damaged during shipment within 24 hours of delivery. A new replacement item will be sent as a solution. 
  

• If you need to return a damaged item, please Contact Us with your order number and details about the product you purchased. We will respond quickly with instructions on how to return the items from your order.

• Cancelled orders that have not been shipped yet are not eligible for a refund. 
• All sales are Final. 

Pricing

• Product pricing is displayed in USD (United States Dollar)
• PRICING AND AVAILABILITY ARE SUBJECT TO CHANGE WITHOUT NOTICE.